AccessoriesVERTICAL WALL CLIP and STEP CLIPS


The latest additions to the Impertek range of products include the Vertical Wall Clips and the Step Clips, two types of accessories that can be directly applied to Jack supports/MegaMart.


VERTICAL WALL CLIP


The VERTICAL WALL CLIP allows grouting to be created between the tiles to be laid and the vertical walls of the perimeter, avoiding the displacement of the tile itself and ensuring maximum stability of the installed flooring. The Vertical Wall Clips are to be used on top of the support, placing them on the grouting fins between the head and the tile to be laid.



STEP CLIPS


The STEP CLIPS, instead, allow the construction of a vertical fixing, with excellent aesthetic results even in difficult situations. They are used in pairs: one at the base of the support (in which it is fitted thanks to hooks) and the other placed between the tile and the head of the support, where it is attached to the grouting fins so that it always maintains the ideal position.

Balanceis the new self-levelling head which corrects the slope of the substructure up to 5%

One of the new products in the support range is, first of all, BALANCE, the self-levelling micro-head that can be used on all Jack supports, designed to allow for slope correction during installation.

Developed to easily and automatically adapt to the various slopes that can be found in construction sites, it allows the inclination of flooring to be corrected up to 5%. Furthermore, it can be used in combination with conventional slope correctors for supports, thus increasing the percentage of use.

Balance consists of 4 pieces that overlap one another: from below we find the connector (which allows the head to be attached to the screws of the Jack supports), the head, the anti-shock rubber and the blocking clip. Finally, thanks to the anti-shock rubber, it ensures greater noise absorption and prevents slipping of the tile.

BALANCE, the self-levelling micro-head that can be used on all Jack supports

MINIBALANCEFrom 25 to 50 mm, the lowest ever self-levelling adjustable support

From the innovative power of Balance and the unique features of PrimeUp comes MINIBALANCE, the lowest ever self-levelling adjustable support: 25mm of height, which, thanks to three different opening steps and the application of two extensions, can reach 50mm.

MiniBalance consists of a base surmounted by the adjustment ring nut: through three different steps, it allows the height of the support to be increased by 5mm (1st step), 10mm (2nd step) or 15mm (3rd step), going from 25mm to a total of 40mm. Above the ring nut, there are the screw of the support and the Balance self-levelling head (with anti-shock rubber and blocking clip).

In addition, below the MiniBalance base, up to two extensions, measuring 5mm each, can be added, thus further increasing the height of the support and reaching a total of 50mm.

MINIBALANCE, il supporto regolabile autolivellante più basso di sempre

  1. Exploded view with two extensions (reachable maximum height shape: 50 mm using the two extensions). From the bottom: Extensions (2 pieces); base MiniBalance; nut MiniBalance; screw MiniBalance; Balance head; anti-shock rubber; Balance locking clip.
  2. Without extensions and in its original position it has a minimum height of 25 mm. From this position it is possible to: A) to raise one notch increasing of 5 mm the height bring it at 30 mm; B) to raise two notches increasing of other 5 mm the height up to 35 mm.
  3. The MiniBalance support, placing the ring on the top step with one extension, reaches a height of 45 mm.

PRIMEUPAn adjustable support with a height of just 10mm

The second important innovation from the Impertek product catalogue for raised flooring is PRIMEUP, an adjustable support with a height of just 10mm.

PrimeUp has a base on which an adjustment ring nut is inserted. Thanks to the latter, by turning two components, the height can be increased from a minimum of 10mm to a total of 15mm.

Moreover, below the base, two extensions can be inserted, which additionally increase the height of the support by 5mm each.

PrimeUp, in full closing phase and without extensions, therefore measures just 10mm, whereas, when it is open at maximum height and with both extensions applied, it reaches 25mm.

Finally, the micro-head of the support is inserted above the base and ring nut, choosing the most suitable among those in the entire MegaMart category.

  1. From the bottom: extension (2 pieces); PrimeUp base, PrimeUp regulation nut; MegaMart head pieces (PrimeUp support can be used together with all the MegaMart headpieces)
  2. PrimeUp support open with 2 extensions: in this way the support reaches its maximum height of 25 mm
  3. Closed PrimeUp support without extensions: in this way the support reaches its minimum extension of 10 mm that can be regulated up to 15 mm turning the two components.

PRIMEUP, Un supporto regolabile con altezza di soli 10 mm