TPE Mignon regular corner fittings

The MIGNON REGULAR CORNER FITTINGS are used to connect waterproof bituminous felts when the rainwater drains from balconies are placed close to the wall.
The long 345 mm tang allows water to drain away from vertical walls, also thanks to anti-drip ribs on the underside of the tang.

Their special design allows Mignon Regular fittings to be used in any design setting, even highly refined ones. With its special funnel-shape design, the hole to discharge the water is as small as possible, thereby allowing for an excellent aesthetic result of the final floor of the balcony.
Mignon Regular connectors are suitable for horizontal drains and the elastic material from which they are manufactured ensures that they are watertight over time. The rectangular cross-section of the tang allows rational and rapid water drainage, and the flange is slightly inclined to the tang to facilitate sloping installation of the connector.

They provide excellent resilience to deterioration caused by the sun, ozone and other weather agents or chemicals normally found in the atmosphere. The elasticity of the material allows for excellent flexibility even at low temperatures, which ensures mechanical and physical properties are maintained over time.

The wide perforated flange ensures perfect adhesion with bituminous sheaths. The drain connectors is 100% compatible with APP and SBS prefabricated bituminous membranes and bituminous coats.
A sandwich installation between the two layers of membrane is recommended to achieve top performance. To improve adhesion, the connector can be pre-coated with a light coat of primer.