Mignon Regular corner fittings are used to connect waterproof roof membranes with the rainwater drains on balconies placed close to low walls. The long 345 mm long tang allows water to drain away from vertical walls thanks also to the anti-drip ribs on the lower part. The special design allows the Mignon Regular drain connectors to integrate perfectly into any design context, even the most prestigious. The special funnel shape minimises the size of the hole required for water runoff, thus allowing for an excellent aesthetic result of the finished balcony floor. Mignon Regular drain connectors are suitable for horizontal drains, and the elastic material from which they are made ensures that they are watertight over time. The rectangular cross-section of the tang allows rational and rapid water drainage and the flange is slightly inclined with respect to the tangto facilitate the installation of the drain connector on a slope. They have excellent resistance to deterioration caused by the sun, ozone and other atmospheric or chemical agents normally present. The elasticity of the raw material from which they are made allows for excellent flexibility even at low temperatures, enabling the mechanical and physical characteristics to remain unchanged for a long time. The wide, completely smooth flange guarantees perfect bonding with TPO synthetic felts. The drain connectors are perfectly compatible with prefabricated TPO synthetic sheets. Thorough cleaning of the drain connector and the synthetic felt is recommended near the connection area to the drain connector.