in TPO L 345 sez. 56x48
The MIGNON CORNER FITTINGS are used to connect waterproof TPO felts when the rainwater drains from balconies are placed close to the wall. With their special design, mignon fittings can be used in any design setting, even very refined ones.
The wide ribbed flange ensures perfect welding with the TPO synthetic felts with the shank as much as 345 mm long lets the water flow away from vertical walls, also because of the anti-drop ribbing at the bottom of the shank.
With its special funnel-shape design, the hole to discharge the water is as small as possible, thereby allowing for an excellent aesthetic result of the final floor of the balcony. Mignon corner fittings are recommended for the installation of horizontal drains.
The elastic material they are made with ensures long-term watertightness. The rectangular section of the shank allows a systematic water drainage, the flange is slightly inclined to the shank to aid a slanted installation of the connector.
They provide excellent resilience to deterioration caused by the sun, ozone and other weather agents or chemicals normally found in the atmosphere. The elasticity of the material allows for excellent flexibility even at low temperatures, which ensures mechanical and physical properties are maintained over time. They are 100% compatible with prefabricated TPO synthetic felts. We recommend thoroughly cleaning the connector and felt near the area where the connector will be welded.