Ideal aerators are designed to favour dynamic extraction of vapour that forms between the slab and the waterproof roofing felt. We recommend installing 3-4 aerators every 100 sqm to achieve top results.
They can also be used as ventilation ducts, especially in combination with the Estraer cover. The special enlarged shape at the base allows Ideal H 160 and H 400 aerators to be used even on ventilation ducts with an external diameter of as much as 125 mm.
The special shape of the ventilators and lids allows for continuous ventilation of the roofing package or ventilation chimneys. They are highly resistant to deterioration caused by the weather agents or chemicals normally found in the atmosphere. They are highly flexible even at low temperatures and their mechanical properties remain unchanged over time. The ribbing at the bottom of the flange, the quick and safe attachment of the cover make Ideal aerators the optimal solution to discharge the vapour constantly forming between the slab and waterproofing.
Estraer used as the cover increases the dynamic suction capacity thanks to the special trumpet-like design that makes the most of the Venturi pipe's suction properties, thereby always guaranteeing the best suction in any situation. The elastic material of which it is made guarantees a watertight seal over time.
They are perfectly compatible with PVC prefabricated synthetic membranes. We recommend thoroughly cleaning the aerator and synthetic felt near the area where the aerator will be joined.
| A mm |
B mm |
C mm |
h mm |
h1 mm |
|---|---|---|---|---|
| 388 | 128 | 73 | 400 | 115 |
