TUNNEL DISCS are used to connect the diffuser felting to the tunnel's wall. Once the discs have been attached to the wall, the waterproof PVC sheet is glued to the discs themselves by using special hot air blowers. The discs must be glued with a special gun with an explosive charge. Make sure there is a gap of about 70-80 cm.
The whole surface of the discs must be welded to the PVC sheet to ensure greater watertightness in the event of pressure from standing water. They are highly flexible even at low temperatures. Their physical and mechanical features remain over time. They are compatible with PVC synthetic waterproof felts.
FLAT DISCS are available with or without a built-in iron washer. The diameter of the pre-inserted washer is 21,75 mm with a hole in the middle of 5 or 6,4 mm. Flat discs are also available with a tear-off system. The flat discs with a tear-off system must only be glued on outside the holes designed for the tear.
| N° | A mm |
B mm |
C mm |
h mm |
|
|---|---|---|---|---|---|
| (1) | 100 | 39,8 | 2,4 | 7,5 | |
| (2) | 100 | 39,8 | 5 | 7,5 | |
| (3) | 100 | 39,8 | 6,4 | 7,5 | |
| (4) | 100 | 39,8 | 2,4 | 7,5 | |
| (5) | 100 | 39,8 | 5 | 7,5 | |
| (6) | 100 | 39,8 | 6,4 | 7,5 |
